
Feature:
- [Low-smell Resin] Ultra-low-odor resin is made of plant materials, which is nearly odorless, and will not have a pungent odor when the bottle is opened and does not affect the indoor air.
- [High Precision Details and Toughness] The 3D printed objects came out pretty hard with high accuracy and good detail. without excessive shrinkage. The printed artwork is stored for a long time without deformation.
- [Wide Compatibility] Compatible for most wavelength 405nm LCD/DLP resin 3D printers, apply for dental design, Garage Kits, etc.
- [Bright and Available Colors] 3D printer rapid resin is manufactured with high-quality pigments and photoinitiators, make the printed models show a bright and stunning color effect.
- [Safe and Reliable] The resin passed MSDS certification. A leak-proof bottle and completely wrapped in a bubble bag, make the photopolymer resin intact during transportation.
Parameter:
- Solidify Wavelength: 405nm
- Bending Modulus: 1.882-2.385 Gpa
- Bending Strength: 59-70 MPa
- Hot Deformation Temperature: 80 ℃(176°F)
- Volume Shrinkage: 3.72-4.24%
- Tensile Strength: 36-52 MPa
- Tensile Modulus: 1.779-2.385 GPa
- Elongation at Break: 11% -20%
- Shore Hardness: 84D
- Glass Transition Temperature: 100 ℃(212°F)
- Density: 1.05-1.25 g/cm³
- Notched Izod Impact Strength:44-49 j/m
- Shelf Life: 1 year
Printing Setting:
- Bottom exposure time(s): 30-60 s/layer
- Normal exposure time: 6-10 s/layer
Precaution:
- Shake the bottle before pouring the resin into the tank.
- Wear gloves and masks before using them to avoid direct skin contact.
- Avoid printing too many items at the same time. Divide your production into several stages to achieve better results.
- Clean finished models with IPA or Ethanol. Dip in alcohol bath and/or clean with soft brush remaining resin on the model.
- Recommended storage temperature 20°C - 30°C.
- To preserve the resin's characteristics, filter the liquid after each printing process and protect the containers from direct sunlight.